Tender Water Valve Handles  $20/ea.

Baldwin Mogul 2-6-0


Specifications:


Length (Engine & Tender).............................83 inches

Height.............................................................22 1/2 inches

Weight............................................................225 pounds

Track Gauge...................................................7 1/4 or 7 1/2 inches

Bore & Stroke.................................................2 x 3 inches

Drive Wheel Dia.............................................7 inches

Minimum Turn Radius..................................25 feet

Water Jet frames available

​Wood cab available

New Cylinders block (original design with larger bore)


New Oak Pilot Beam for American $40.00

C.P.   Huntington 4-2-4


Specifications:


Length.....................................45 3/4 inches

Height.....................................19 1/2 inches

​Weight.....................................130 pounds

Track Gauge............................7 1/4 or 7 1/2 inches

Bore & Stroke..........................1 3/8 x 2 inches

Drive Wheel Dia.....................6 3/4 inches

Minimum Turn Radius...........15 feet

​Water Jet  frames available

​New wood cab kit availble







Handrail Stanchions - exact replica of CP Jupiter  $70/ea (stanchion and nut)

Copyright Banning Locomotive Works LLC. All rights reserved. 

Locomotives

We offer 5 different locomotives in 1.5" scale. The C.P. Huntington,  4-4-0 American, Baldwin Mogul 2-6-0, B&O Crab 0-4-0 are in kit form or RTR (Ready-To-Run) and the Bulldog 0-4-0 is in two platforms: the Saddle Tank version or Switcher version.  There are many additional bolt-on items available.  The Switcher has a tender and the Tanker has a riding car.  Tender is available with both platforms.  The Bulldog locomotive is RTR only.

Cab kits or completed cabs available.

The Bulldog 0-4-0


Specifications:
1.5 x 2.25" Bore & Stroke
5" Drivers
Walschaerts Valve gear
6.5625" Boiler
Length: Engine and Tender 67"
(Tank Version) 34.5"
Height: 19.750"
Width: 14"
Gauge: 7.5"
Fuel: Coal

Locomotive(s) come with one 3/16" lifting injector in the cab, lubricator, bell and whistle.
Additional Items are second injector, working dynamo, steam driven water pump.
We have started to build the production engines. They will be available in 2018. Target range ready-to-run $12,500-$14,500
The concept locomotive was built and has proven to be very successful. It has ran at our railroad here and at Maricopa. Attached below is video of the concept locomotive and some photos of the actual production locomotive. Taking pre-orders now. Order by December 15th guaranteed delivery May 2018.



1836 Box Car Unpainted Ready to Run $1500.00

We have coal for sale. Really good stuff. No clinkers, low ash, 14,000 BTUs per lbs. Burns really hot and clean. 

2.5" Scale Baldwin 8-18C Throttle Quadrant $60/ea.

American or 1" scale Throttle fully machined $150

Custom Pattern Making

Call or email for a quote

New Crab Axle Pump 

Fully machined $300.00

Full set of drawings available

American 4-4-0


         Specifications:


Length (Engine & Tender)................64 inches

Height................................................19 1/2 inches

Weight...............................................150 pounds

Track Gauge......................................7 1/4 or 7 1/2 inches

Bore & Stroke....................................1 3/8 x 2 inches

Drive Wheel Dia................................6 3/4 inches

Minimum Turn Radius.....................25 feet

Fuel....................................................Coal

​Boiler.................................................5 9/16" Dia Steel

Water Jet frames available

​New wood cab kit available




B&O Crab 0-4-0


                                                               Specifications:                                                


Length.........................................22 inches

Width..........................................14 1/2 inches

Weight........................................135 pounds

Track Gauge...............................7 1/4 or 7 1/2 inches

Bore & Stroke.............................1 3/8 x 3 inches

Drive Wheel Dia........................4 1/4 inches

Boiler.........................................8 5/8 dia

​Minimum Turning Radius........10 feet

​NEW WATER JET CRAB KIT.........$1950.00




2.5" scale whistle machined from Baldwin drawings for the 8-18C (Eureka and Sonoma) $350.00